Inspection and adjustment of the electrical system, including wiring, contacts, capacitors, and relays, is the first step in setting up an alternating current. The last step is to inspect the condensate drain pipe. As the unit cools the air, a small amount of condensation forms due to the hot air coming into contact with the cold refrigerant. The air conditioning units have a condensation drain pan with a condensate drain line that carries the water out of the unit.
During an air conditioner setup, a professional HVAC technician will remove the front panel of the air conditioner to thoroughly inspect the condition of the evaporator coil. This coil is normally placed above the oven and its purpose is to absorb heat from your home air. Once the air passes through the evaporator coil, it cools down enough to be distributed back to your home. If any problems are noticed, such as dirtiness, freezing, or leaking, the technician will let you know and provide you with the best options for further action.
When you perform an air conditioner tune-up, a professional will also check the refrigerant levels in your air conditioning unit. If you have an older air conditioning unit, an air conditioner maintenance visit will reveal its age and general condition. After inspecting the inside of the air conditioner unit, a professional will clean the evaporator and condenser coils. As part of the inspection process, each component of the air conditioning system is cleaned, adjusted and checked for efficiency.
This includes checking for refrigerant levels, commonly referred to as freon or refrigerant. This is what ultimately cools down the air that enters through the air conditioning unit. During setup of the cooling system, a heating, ventilation and air conditioning contractor will identify any issues that may be preventing your system from expelling cold air. Cleaning the evaporator and condenser coils helps to cool down the air entering your unit and reduces energy consumption at the same time.
The heating and air conditioning share a common condensing pipe so it's important to adjust it before winter.
